The Oceanic Cruz BCD is simple in design yet a very functional jacket-style. This BC is ideal for cold water local diving with a lift capacity of 48 lbs. and yet packs flat at 3.7 kg for travel. More details...

Equipment: Scuba Gear

You can earn 140 Reward Bubbles on this product!

List Price: $669.95

Price: $595.00

You Save: $74.95 (11%)

Size:

Inflator:

Constructed with ballistic nylon and fadeless 1600 denier Cordura® material, the harness and bladder are reinforced at stress points to ensure superior durability and comfort while diving. Equipped with a QLR weight integration system and two trim weight pockets that can handle up to 30 lbs, cruising the ocean currents is sure to be a joy.

Rugged design and high lift capacity for local diving plus packs flat for travel
Durable, fadeless 1600 Cordura construction
Equipped with two trim weight pockets and Oceanic's QLR Integrated Weight System that can accommodate up to 30 lbs.
Versatile power inflation/deflation with right shoulder and lower pull-dump control
Easy to use large main zippered pockets
Strategically placed stainless steel grommets for your accessories

Rear Weight Pockets
Located on the back of the BC on either side of the tank cradle. Provides greater integrated weight capacity and better attitude underwater. Carries up to 10 non-dumpable pounds.

Fadeless Cordura®
Exterior abrasion points are covered in our fadeless 1600 Cordura® - tough stuff that will hold up to years of extreme diving and keep that "new look" longer.

Versatile Inflation/Deflation Controls - Right Shoulder Pull-Dump - Lower Pull-Dump
Ergonomically designed to be functional and easy to use in any dive position, pull-dumps have been positioned on the right shoulder and lower lobe for convenience and control. Additionally, the Reliant Integrated Inflator provides a full range of airway exhaust/inflation control. Simply press a button to produce precise flow for trimming dive attitude or maximum flow for major changes in buoyancy. A large exhaust valve creates a flow rate higher than the inflation rate of the power inflator, improving diver control during ascents.

Stainless Steel and Plastic D-rings
Welded and slightly bent for easy, this one-handed attachment can be found on the right shoulder for additional mounting points. Also incorporated into the BC design are 2 plastic D-rings located on the QLR for versatile accessory mounting.

Accessory Mounting Grommets
Located just above both the left pockets, a pair of built-in stainless steel grommets keep our Spinner Knife, Integrated Retractor ( perfect for streamlining gauges, lights and other essentials) , and Utility Pocket out of the way but just where you want it.

2 Quick-Release Adjustment Buckles
The Cruz's extra-strength harness is outfitted with quick release shoulder buckles for easy adjustment, even with thick gloves. Also included is a dual-adjust sternum strap for increased adjustment range.

Adjustable Cummerbund
Oceanic's cummerbund offers adjustment to fit a wide range of sizes. For additional customization, the cummerbund may be easily changed with another size.

Padded Backpack with Integrated Carry Handle
Extra heavy duty padding provides comfort both above and below the surface without having to sacrifice the stability of a hard backpack.

Lift Capacity
High-lift capacity and yet not overly bulky for travel.

Tank Positioning Strap
Tank strap providing convenience for positioning and stability.

2 Large Main Zippered Pockets
Zippered so they're easy to get into. Enough room to store your OP 3x3 Light, extra Shadow Mask, Pocket Snorkel, or P.S.D.!

Optional Air XS 2 Alternate Inflator
The AIR XS 2 combines the reliability, performance and durability of the SlimLine OCTOPUS and INFLATOR into one very low profile, streamlined package. The regulator/inflator combination is as small as many BC inflators alone, with breathing performance superior to many stand-alone octopus regulators.

The AIR XS 2 can be added to any existing Oceanic BC or may be purchased already installed on a new Oceanic BC for additional savings.

FEATURES & FUNCTIONS	CRUZ BC
Type	JACKET
Air Cell Material	FADELESS 500 DENIER NYLON
Shoulder Panel Material	FADELESS 1600 DENIER CORDURA
Pocket Panel Material	FADELESS 1600 DENIER CORDURA
Reflective Piping	NO
Adjustable Positioning System (A.P.S.)	NO
Main Pockets / Closure	ZIPPER
Accessory Pockets / Closure	N/A
Max Dumpable Integrated Weight	20 LBS.
Max Non-Dumpable Trim Weight Pockets	10 LBS.
Padded Backpack	YES
Lumbar Support	NO
Carrying Handle	YES
Molded Tank Cradle / Anti-Slip Pad	YES
Stainless Steel D-rings	1
Plastic D-rings	2
Sternum Strap	YES
Depth Compensating Cummerbund	YES
Right Shoulder Pull-Ball Exhaust	YES
Rear Pull-Ball Exhaust	YES
Twin Cylinder Band Adaptor	NO
Integrated Retractor Mount	YES
Spinner Knife Mount	YES
Crotch Strap	NO
Air XS 2 Alternate Inflator	OPTIONAL
Lift Capacity
XS	20 LBS.
SM	26 LBS.
MD	34 LBS.
ML
LG	41 LBS.
XL	48 LBS.
XXL
Warranty	2 YEAR
30-Day Satisfaction Guarantee	YES

WARRANTY COVERAGE	Materials and Craftsmanship Requires Annual Service
WARRANTY PERIOD	Limited Lifetime (Product must be regristered with Oceanic Australia)
EXCEPTIONS	Hose end O-rings, hose fitting corrosion, abrasion, punctures or cuts to bladder material, or delamination due to exposure to chlorine exposure.

This Warranty also covers free service parts for life for the BCD. Obviously some common sense conditions apply.

Those conditions are:

The product must be registered with Oceanic Australia within 30 days of purchase. This registration may be completed On-Line or by completing and returning the Warranty Registration form provided by your Authorised Oceanic Dealer.
Failure to register your product will reduce your warranty status to 1 year, when purchased from an Authorised Dealer in Australia, under normal recreational use, and cover against any defects in materials and workmanship. The free service parts for life will not be applicable in this case.
All products must be serviced annually by an authorised Oceanic Service Technician. This agreement is null and void if such regular annual service is not performed.
Oceanic Australia and your authorised Oceanic Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are described in Product Specific Warranties later in this document.
All labour fees included in annual service are the responsibility of the owner of the product serviced.
This warranty shall be void if the equipment has been tampered with by a person (or persons) not authorised by Oceanic to perform such service.
The warranty is non transferable and extends to the original purchaser only. It is void if the equipment was purchased from anyone other than an Authorised Oceanic Dealer in Australia.
Normal wear and tear as determined by age and usage is excluded from the Oceanic Lifetime Warranty.

To maintain this Lifetime Warranty, you must show proof of purchase and proof of authorised annual service. If returned for service, your product should be accompanied by a copy of the original sales receipt.

This BCD comes with free service parts for life plus the Abyss Satisfaction Guarantee.

30-DAY SATISFACTION GUARANTEE
This guarantee warrants that at any time during the first 30 days of purchase, this product fails to meet your expectations, that product may be exchanged for any other product of equivalent price. No questions asked.

EXPRESS REPLACEMENT POLICY
Should anything go wrong with this product within the first 30 days of purchase, we will immediately replace the product. No questions asked.

Parts for life conditions are:

The product must be registered with Oceanic Australia within 30 days of purchase. This registration may be completed On-Line. We are happy to help you with this.
Failure to register your product will reduce your warranty status to 1 year, when purchased from an Authorised Dealer in Australia, under normal recreational use, and cover against any defects in materials and workmanship. The free service parts for life will not be applicable in this case.
All products must be serviced annually by an authorised Oceanic Service Technician. This agreement is null and void if such regular annual service is not performed.
Oceanic Australia and your authorised Oceanic Dealer will provide all overhaul service parts at no charge. Any parts required other than overhaul service parts are the responsibility of the owner of the product serviced. These exceptions are LP hoses, swivel or hose end O-rings, mouthpieces, stress cracks due to spraying with aerosols, rubber deterioration due to excessive exposure or lack of maintenance, chrome loss, or corrosion.
All labour fees included in annual service are the responsibility of the owner of the product serviced.
The Parts for life is non transferable and extends to the original purchaser only. It is void if the equipment was purchased from anyone other than an Authorised Oceanic Dealer in Australia.

To maintain thisParts for life offer, you must show proof of purchase and proof of authorised annual service. If returned for service, your product should be accompanied by a copy of the original sales receipt.

Write your own review

Rate this product: 1 2 3 4 5

Padi	Sydney Dives	Dive Courses	Dive Packages
Oceanic	Seal Dives	Diving Lesson Sydney	Dive Computers
Aeris	Shark Dives	PADI Advanced Course	Regulators
Hollis	Local Dive trips	Enriched Air Course	Wetsuits
Lavacore	Dive the HMAS Adelaide	Wreck Diver Course	Scuba Tanks
Faber	Overseas Dive Trips	Deep Diver Course	Fins
McNett	Christmas Trip	Divemaster Course	Masks
Pinnacle	Truk Lagoon Trip	PADI Instructor Course	Gear Specials

Home

Locate Us

About Us

Abyss Scuba Diving

dive@abyss.com.au

Ramgate , NSW , 2217 Australia

02 95839662