Oceanic VEO 3.0 Dive Computer

Oceanic VEO 3.0 Dive Computer
Oceanic VEO 3.0 Dive Computer
Brand: Oceanic
List Price: $679.00
Price: $599.00
Oceanic VEO 3.0 Dive Computer
Oceanic VEO 3.0 Dive Computer
Oceanic VEO 3.0 Dive Computer
Oceanic VEO 3.0 Dive Computer
Oceanic VEO 3.0 Dive Computer
Oceanic VEO 3.0 Dive Computer
(Click to see larger image and other views)
Brand: Oceanic
List Price: $679.00
Price: $599.00

The Oceanic VEO 3.0 Features Oceanic’s exclusive Dual Algorithm, 2-Nitrox Mix Compatibility, Audible Alarms, 3-Button Interface with settings "Step Back", and so much more. All in a strong, lightweight "hockey-puck" module for your wrist or console.

Upto 12 Months Interest Free With zipMoney

For more details click on the tabs below to expand or collapse them:

The Oceanic VEO 3.0 continues Oceanic's tradition of designing rugged, feature-rich personal dive computers that are intuitively easy to use and reasonably priced. Featuring Oceanic’s exclusive Dual Algorithm, 2-Nitrox Mix Compatibility, Audible Alarms, 3-Button Interface with settings "Step Back", and so much more.  All in a strong, lightweight "hockey-puck" module for your wrist or console.
  • Powered by Oceanic's Exclusive Dual Algorithm™ - Your choice between Pelagic DSAT (Spencer/Powell data basis) or Pelagic Z+ (Buhlmann ZHL-16C data basis)

  • 3 Operating Modes: NORM (Air and Nitrox), GAUGE (with run timer) and FREE (tracks calculations to allow switching between NORM and Free)

  • 3 Operating Buttons with "Step Back" interface – allows forward and backward navigation through menus and settings

  • Switch between up to 2 Nitrox mixes to 100% O2 with no restriction (Gas 1 may be up to 100%, and may be less or greater than Gas 2)

  • Stop times <3 minutes - displays minutes & seconds

  • Deep Stop with Countdown Timer – Maybe turned on or off.  2 minute countdown at half your max depth, for dives greater than 80 ft / 25m

  • Single button access to "Last Dive" display (max depth & bottom time)

  • Data Retention - maintains calculations indefinitely when the battery is changed

  • Audible Alarm with flashing LED light

  • SmartGlo Backlighting senses ambient light, enabling the backlight only in low light conditions, conserving battery life

  • 24 dive on-unit log book

  • History Mode includes total number of dives, max depth, total dive hours, and lowest temp

  • Optional PC Interface with OceanLog Download and Settings Upload

  • Firmware Auto-Update: download and install the latest firmware – these may be operational improvements or even new features

FEATURES & FUNCTIONS
VEO 3.0
Modes of Operation
Norm (Air / Nitrox) Gauge, and Free Dive
Push Buttons
3
User Interface
Click forward, Fast Scroll and Step Back
Mounting Options
"Hockey Puck" Module, Wrist, 2 and 3 Gauge Consoles
Activation
Water or Push Button
Dual Algorithm
Your choice between Pelagic DSAT (Spencer/Powell data basis) or Pelagic Z+ (Buhlmann ZHL-16C data basis)

Personal Conservative Factor Adjustment
Each Level provides No Decompression Limits for the next dive +3000 ft altitude
Altitude Algorithm Basis
NOAA
O2 Limit Basis
NOAA
Tissue Compartments
12 (5 to 480 minutes)
Automatic Altitude Adjustment
2,000 - 14,000 ft
Decompression Capability
10 - 60 ft (3-18 m)
Deep Stop
OPTIONAL - :02 COUNTDOWN TIMER AT 1/2 MAX DEPTH FOR DIVES DEEPER THAN 80 ft/25m
Automatic Safety Stop Prompt
YES - ADJUSTABLE DEPTH AND TIME
Audible Alarm
YES - MAY BE DEACTIVATED AND/OR CUSTOMIZED BY USER
Alarm Acknowledgment (U/W Deactivation)
YES - PUSH BUTTON DEACTIVATES CURRENT ALARM
Ascent Rate Range
11-30 fpm / 21-60 fpm
Ascent Rate Maximum
30 fpm (<60 ft)
60 fpm (>60 ft)
SmartGlo Backlight
YES - ADJUSTABLE DURATION
Diver Replaceable Batteries
YES
Battery Type
CR2450
Battery Life*
300 DIVE HOURS
Data Retention (retains calculations indefinitely during battery change)
YES
Low Battery Indicator (Graphic)
YES
Calendar / Clock
DATE & TIME
Operating Depth (NORM/FREE)
330 ft / 100 m
Operating Depth (GAUGE)
399 ft / 120 m
24 Hour Time to Fly Countdown
YES
Gauge Mode Run Timer
YES
Calculated Desaturation Fly Countdown
YES
Dive Mode Displays
MAIN, UP TO 2 ALTERNATES AND 1 SECONDARY
High O2 Alarm / Warning
300 SOTU / DOTU
High PO2 Alarm / Warning
1.6 DEFAULT OR USER SETTING
On-Unit Log Capacity
24 DIVES
PC Data Download
OPTIONAL
PC Settings Upload
OPTIONAL
Firmware Update
OPTIONAL
OceanLog Download Memory Capacity
512K**
Pre-Dive Planning Sequence
PUSH BUTTON 30-190 ft
Temperature Display
YES
Nitrogen Tissue Loading Bar Graph
YES
Oxygen Loading
NUMERIC %
Variable Ascent Rate Bar Graph
YES
No Decompression Time Remaining Display
YES
O2 Time Remaining Display
YES
Set Mode with Rapid Advance
YES
Set Mode with "Step Back"
YES
Set FO2 Value (%) Gas 1
AIR, 21-100%
Set FO2 Value (%) Gas 2
OFF, 21-100%
Set Audible Alarm On/Off
YES
Set Max Depth Alarm
YES
Set Elapsed Dive Time Alarm
YES
Set Maximum Nitrogen Tissue Loading Bar Graph Alarm
YES
Set Personal Conservative Factor
YES
Set Dive Time Remaining Alarm
YES
Set Units Of Measurement
YES
Set Hour Format (12/24 Hour)
YES
Set Time of Day
YES
Set Date
YES
Set Maximum PO2 Alarm
YES
Set FO2 50% Default
YES
Set Backlight Duration
YES
Set Safety Stop Time and Depth
YES
Set Sampling Rate (OceanLog Download)
1 (Free Dive Mode Only)/ 2/15/30/60 SECONDS
Set Digital Gauge Mode On/Off
YES
Set Water Activation On/Off
YES
Set Free Dive Elapsed Dive Time Alarm
YES
Set Free Dive Countdown Timer
YES
Set Free Dive Max Depth #1
YES
Set Free Dive Max Depth #2
YES
Set Free Dive Max Depth #3
YES
   
Warranty
2 YEAR
30-Day Satisfaction Guarantee
YES

*Battery Life: Battery life estimates are based on full-capacity batteries, and continuous usage as described.

- 7 days per week

- 2 dives per day

- 1 hour dive time

- 2 hour surface interval

- 18 hour interval from last dive to the first of the next day

** Oceanic Personal Dive Computers have user selectable Sampling Rates that determine when data is sampled and stored for subsequent download to associated PC interface programs. More frequent sampling provides more data per dive yet results in storage of fewer dives for download. Use with Air or Nitrox, with or without air integration, dive profiles, Free Diving activities, and other variables may also affect the number of dives that can be stored.

Sampling Rate
512K Estimated Capacity
60 Seconds
100-110 Hours
30 Seconds
50-55 Hours
15 Seconds
25-30 Hours
2 Seconds
4-5 Hours
1 Seconds (Free Dive)
1.5-2 Hours
The Oceanic VEO 3.0 continues Oceanic's tradition of designing rugged, feature-rich personal dive computers that are intuitively easy to use and reasonably priced. Featuring Oceanic’s exclusive Dual Algorithm, 2-Nitrox Mix Compatibility, Audible Alarms, 3-Button Interface with settings "Step Back", and so much more.  All in a strong, lightweight "hockey-puck" module for your wrist or console.
  • Powered by Oceanic's Exclusive Dual Algorithm™ - Your choice between Pelagic DSAT (Spencer/Powell data basis) or Pelagic Z+ (Buhlmann ZHL-16C data basis)

  • 3 Operating Modes: NORM (Air and Nitrox), GAUGE (with run timer) and FREE (tracks calculations to allow switching between NORM and Free)

  • 3 Operating Buttons with "Step Back" interface – allows forward and backward navigation through menus and settings

  • Switch between up to 2 Nitrox mixes to 100% O2 with no restriction (Gas 1 may be up to 100%, and may be less or greater than Gas 2)

  • Stop times <3 minutes - displays minutes & seconds

  • Deep Stop with Countdown Timer – Maybe turned on or off.  2 minute countdown at half your max depth, for dives greater than 80 ft / 25m

  • Single button access to "Last Dive" display (max depth & bottom time)

  • Data Retention - maintains calculations indefinitely when the battery is changed

  • Audible Alarm with flashing LED light

  • SmartGlo Backlighting senses ambient light, enabling the backlight only in low light conditions, conserving battery life

  • 24 dive on-unit log book

  • History Mode includes total number of dives, max depth, total dive hours, and lowest temp

  • Optional PC Interface with OceanLog Download and Settings Upload

  • Firmware Auto-Update: download and install the latest firmware – these may be operational improvements or even new features

Veo 3.0 Tutorial - Introduction
An overview of the Oceanic Veo 3.0 Personal Dive Computer.

Veo 3.0 Tutorial - Settings
An overview of the Oceanic Veo 3.0 scuba diving computer's settings.

Veo 3.0 Tutorial - No Deco Dive Mode
Tutorial video for the Veo 3.0 dive mode including main display, alternate displays, deep stop, and safety stop

 

The Oceanic VEO 3.0 continues Oceanic's tradition of designing rugged, feature-rich personal dive computers that are intuitively easy to use and reasonably priced. Featuring Oceanic’s exclusive Dual Algorithm, 2-Nitrox Mix Compatibility, Audible Alarms, 3-Button Interface with settings "Step Back", and so much more.  All in a strong, lightweight "hockey-puck" module for your wrist or console.
  • Powered by Oceanic's Exclusive Dual Algorithm™ - Your choice between Pelagic DSAT (Spencer/Powell data basis) or Pelagic Z+ (Buhlmann ZHL-16C data basis)

  • 3 Operating Modes: NORM (Air and Nitrox), GAUGE (with run timer) and FREE (tracks calculations to allow switching between NORM and Free)

  • 3 Operating Buttons with "Step Back" interface – allows forward and backward navigation through menus and settings

  • Switch between up to 2 Nitrox mixes to 100% O2 with no restriction (Gas 1 may be up to 100%, and may be less or greater than Gas 2)

  • Stop times <3 minutes - displays minutes & seconds

  • Deep Stop with Countdown Timer – Maybe turned on or off.  2 minute countdown at half your max depth, for dives greater than 80 ft / 25m

  • Single button access to "Last Dive" display (max depth & bottom time)

  • Data Retention - maintains calculations indefinitely when the battery is changed

  • Audible Alarm with flashing LED light

  • SmartGlo Backlighting senses ambient light, enabling the backlight only in low light conditions, conserving battery life

  • 24 dive on-unit log book

  • History Mode includes total number of dives, max depth, total dive hours, and lowest temp

  • Optional PC Interface with OceanLog Download and Settings Upload

  • Firmware Auto-Update: download and install the latest firmware – these may be operational improvements or even new features

Product Reviews
Rate this product:  1   2   3   4   5