Air Time Remaining
The Air Time Remaining feature calculates current depth, tank pressure, your breathing rate, ascent time, and decompression status to tell you exactly how much time you can remain underwater. The Pro Plus 3 continually displays Air Time Remaining via a numerical bar graph in addition to cylinder pressure. You may also display Air Time Remaining in oversized digits at any time with the press of a button.
Dive Time Remaining
Dive Time Remaining, like Air Time Remaining provides a 'real' number in minutes. This calculation combines Air Time Remaining, Nitrogen and Oxygen absorption, displaying whichever allows less time.
Choose Your Dive Mode Display
The new Pro Plus 3 is as versatile underwater as it is topside. Upon starting your dive, the Pro Plus 3 will simply display your current depth, how long you can stay there and cylinder pressure. While many divers have asked for such simplicity and ease of use, you know that with all the Pro Plus 3's features, there must be more. And there is. Simply press the button to see more information. Is this information important to you on a full time basis? Leave it there. Just want to check it and then move on to another display? You can do that too. It's up to you and your new Pro Plus 3.
Oversized Digits
Take the Oceanic challenge: When shopping for a new dive computer, compare the displays. When it comes to viewing critical information, which would you rather see at 100 feet?
Water or Manual Activation
Is it a good idea to check your computer before entering the water? You bet. Could you forget to activate your computer? Sure. The Pro Plus 3 features push-button or automatic activation, triggered by water contact. A benefit of push-button activation is easily verifying operation and cylinder pressure, but in case you forget, or simply choose not to activate your computer, it can be as simple as jumping in the water.
Audible Alarms with Flashing LED Warning Light
The Pro Plus 3 features a variety of system and user-customized audible alarms, alerting you to situations that pose a potential danger, or simply serve as a convenient reminder.
Audible Alarm Acknowledgement™
Have you ever had difficulty hearing your computer’s audible alarm? Perhaps that little beep signifying a potentially dangerous situation was timed perfectly with some large exhaust bubbles rushing past your ears. Or maybe it seemed to be insignificant as that huge manta ray soared overhead. You won’t miss the Pro Plus 3’s audible alarm. Once triggered, the alarm will sound continuously for 10 seconds. We know what you’re thinking… “That’s nice, I’ll definitely hear the alarm, but isn’t that going to annoy me and everyone else in the water?” We thought of that too. The alarm’s job is to get your attention so that you look at the computer. Once it does that, simply press the button and it will stop. You’re a responsible diver and Oceanic treats you that way. If you really want to exceed your pre-set maximum depth alarm by a couple of feet to capture that award-winning photograph – go ahead!
Air or Nitrox
The Pro Plus 3 acts simply as an ‘Air’ computer until you tell it otherwise, whether that is this weekend or 2 years down the road. As your training and experience grow, the Pro Plus 3 is designed to grow with you, being easily programmed for Nitrox mixtures from 21% to 100%.
Oceanic Personal Dive Computer Algorithm
Decompression theory can be trusted only as far as it has been demonstrated by actual test dive data. In 1987 a unique series of experiments were conducted by Diving Science and Technology (DSAT). Commissioned by the Professional Association of Diving Instructors (PADI), these Doppler ultrasound monitored human experiments conducted by Dr. Michael Powell produced the most comprehensive data set that exists for recreational divers to this day. These data were used to validate the PADI Recreational Dive Planner and are the basis of the algorithm used in all Oceanic Personal Dive Computers (PDCs).
"The ultimate adjustable algorithm." That's the way divers, instructors and Oceanic Pro Dealers refer to Oceanic PDCs. Our color-coded bar graphs provide complete control of your margin of safety for each dive. Want to be a bit more cautious? Make it a personal rule to never enter into the yellow caution zone, or stay one pixel away, or – you get the point. Now you can even program several of our PDCs to do it for you with our patent pending Nitrogen Bar Graph Alarm; set it once and let your computer alert you when your bar graph reaches that level.
Automatic Safety Stop Prompt
A brief audible and visual alarm remind you as you approach 15 feet. An automatic 3-minute timer counts down to zero. As in any other dive mode, you still have access to other pieces of information, and there is no penalty should you choose to disregard the safety stop.
FastSet™ Menu System
Speed through menu items and set modes easily and quickly with Oceanic’s FastSet Menu and intuitive dual button operation.
Date and Time Stamp
The Pro Plus 3 features time of day on the surface as well as underwater for quick reference. Time and date stamp also helps you to easily identify specific dives in Log Mode or PC download memory.
User Friendly Mode Icons
All Oceanic computers feature bar graphs and universal icons that help you to quickly understand the information displayed on the screen at a glance.
Graphic User Interface™
Using the recognizable logic of green, yellow and red color-coding in conjunction with bar graphs, the diver has at-a-glance information. As easy to understand as a traffic light, the Graphic Diver Interface helps you to easily monitor No-Decompression status, Oxygen Accumulation, Ascent Rate, and Air Time Remaining.
Automatic Altitude Compensation
All Oceanic computers automatically compensate for altitude up to 14,000 feet, giving adjusted no-decompression times and depths. They even automatically recalibrate the depth display for freshwater instead of seawater.
Diver-Replaceable Batteries
All Oceanic computers feature diver replaceable batteries. This can be a real trip-saver on board a live-aboard boat!
Battery Hot Swap™
An added benefit to diver replaceable batteries. The “hot-swap” feature allows you to change batteries between dives while maintaining all calculations.
24-Hour Fly Countdown and Calculated Desaturation Time
The Pro Plus 3 features both a dual 12-hour countdown timer and calculated Desaturation Time, the theoretical time required to off-gas all residual nitrogen at sea level.
Variable Ascent Rate Indicator™
Some computers simply flash an icon, telling you that you’re ascending too quickly. The Pro Plus 3’s Variable Ascent Rate Indicator bar graph acts as a speedometer, allowing you to very precisely control your ascent rate via the green, yellow, and red bar graph.
Depth-Dependent Ascent Rate
The Pro Plus 3 features a depth-dependant ascent rate, allowing increased rates at deeper depths and providing additional safety as you near the surface.
SmartGlo® Backlighting
Want to verify your set mode options before your night dive? Press the SEL button to activate the backlight and go ahead! A small photo-sensor in the face of the Pro Plus 3 analyzes the intensity of ambient light each time another button is pressed. If it’s dark, SmartGlo backlighting will be there for you when you need it, and it will preserve battery life when you don’t.
50 Dive On-Unit Log Book
The Pro Plus 3 features on-unit data storage capacity for 24 dives. Date and time stamp makes locating and viewing a specific dive quick and easy.
Optional OceanLog® PC Interface
The Pro Plus 3 features a watertight, plug-in serial connection for fast and reliable PC download. Optional OceanLog software provides intuitive post-dive analysis and logging. You have the option to add and/or edit many pieces of information to customize your log book, with data such as depth and decompression status during a dive, maximum depth, bottom time, air consumption, air time remaining, no-decompression status, descent and ascent rate, surface interval, and any violations recorded automatically.
Optional PC Upload
In addition to detailed dive analysis, the optional OceanLog PC Interface also allows you to quickly and easily set all of your Pro Plus 3 settings and options directly through your PC.
Extended Range Gauge Mode
Divers using advanced breathing gas mixtures or otherwise conducting planned dives beyond the operational limits of the computer may utilize the Pro Plus 3 as an advanced air integrated digital depth gauge and bottom timer with detailed PC Interface.
USER SETTINGS AND OPTIONS
Turn-Around Pressure Alarm
The 'Turn-Around' Pressure Alarm is a unique patent-pending feature that allows you to pre-program an audible reminder when you reach 1000 to 3000 psi in 250 psi increments. This helps ensure that you return to your exit point with plenty of air.
Ending Pressure Alarm
Air Time Remaining calculations are based on the 'Ending' Pressure Alarm. You define how much air you want in reserve upon reaching the surface.
Air or Nitrox
The Pro Plus 3 acts simply as an ‘Air’ computer until you tell it otherwise, whether that is this weekend or 2 years down the road. As your training and experience grow, the Pro Plus 3 is designed to grow with you, being easily programmed for Nitrox mixtures from 21% to 100%.
Maximum Depth Alarm
The Maximum Depth Alarm provides an audible warning upon reaching your planned maximum depth. This is an important safety feature for deeper dives or less experienced divers, and it comes in handy for rebreather diving where you can pre-set another level of safety.
Elapsed Dive Time Alarm
You’re on a boat trip and the captain says, “Dive your own profiles, but be back in an hour – we’re having lunch!” Just set your Pro Plus 3 to alert you when your elapsed dive time reaches one hour.
Units of Measurement
Choose between Metric and Imperial settings for depth and pressure.
12/24 Hour Time Format
Choose between 12 or 24 hour time format, independent of Units of Measurement.
Date and Time of Day
The Pro Plus 3 displays time of day on the surface as well as underwater for quick reference. Time and date stamp helps you to easily identify specific dives in On-Unit Log Mode or PC download memory.
Audible Alarm and Flashing LED Warning Light On/Off
You may choose to deactivate all audible and LED alarms.
Nitrogen Tissue Loading Bar Graph Alarm
Many divers have claimed in the past that Oceanic’s Nitrogen bar graph design provides the ultimate user-adjustable computer. Want to be a bit more cautious? Make it a personal rule to never enter into the yellow caution zone, or stay one pixel away, or – you get the point. Now you can program the Pro Plus 3 to do it for you. Set it once and let your computer alert you when your bar graph reaches a pre-determined level.
Dive Time Remaining
Dive Time Remaining provides a ‘real’ number in minutes. This calculation considers both Nitrogen and Oxygen absorption, displaying whichever allows less time. With this unique Pro Plus 3 feature, you are able to program an audible alarm to alert you upon reaching a pre-set number in minutes.
Maximum PO2 Level (Nitrox)
When diving Nitrox, do you prefer your maximum PO2 exposure to be 1.2 ATA? 1.6 ATA? Depending on where you learned and your own personal comfort zone, the answer may be very different from diver to diver. The Pro Plus 3 lets you set your own limit. Program an audible alarm to sound at the level that you prefer.
FO2 50% Default On/Off
Following a Nitrox dive, many dive computers calculate your next dive based on a “worse-case scenario”, mix of 50% Oxygen and 79% Nitrogen should you forget to reset your actual mix. With FO2 50% Default OFF, your mix remains at the original set point until you change it again.
SmartGlo® Backlight Duration
Would you like the backlight to shut off as soon as you release the button? Would you rather it remain on for 0, 3, or 7 seconds? We don’t need to make these decisions for you; it’s your choice.
PC Interface Sampling Rate
You have the option to choose at which rate (timed or depth transition) the Pro Plus 3 samples and stores data for later download to your PC. More frequent sampling will provide extreme detail of your dive profiles with limited storage capacity. Less frequent sampling, while it provides less detail, can store up to 150 dives!
Extended Range Digital Gauge Mode On/Off
Activate Digital Gauge Mode for freediving or dives conducted beyond the limits of the computer.
