A diver checking the Oceanic O.i above a sunlit wreck

Oceanic O.i Wrist Dive Computer

See depth and no-deco time on a bright 2.4‑inch colour screen. Add wireless tank pressure when you want it. Log your dives for free.

Three-quarter view of the O.i wrist computer and silicone strapSee the display
Choose an example O.i dive screen

What you’ll see underwater

The numbers you look for first get the most space. Turn the NavDial to scroll, press it to select and hold it to go back. There’s one control to find when you’re wearing gloves.

Watch Oceanic’s walkthroughs
Oceanic O.i scuba screen with depth, no-decompression time and elapsed dive time
Scuba displayDepth and no-decompression time sit at the top. Dive time, maximum depth and ascent rate sit below.
Oceanic O.i showing a cylinder icon with pressure in bar and estimated gas time remaining
With a paired transmitterThe cylinder symbol shows pressure in bar. Beside it, gas time remaining estimates breathing time from your depth and gas use.
Oceanic O.i safety-stop screen with the countdown highlighted in yellow beside depth
Safety-stop displayThe countdown turns yellow beside the depth reading. A matching strip across the bottom makes this screen easy to recognise.

Do you need a transmitter?

Only if you want cylinder pressure on your wrist. Both setups use the same O.i, so you can start with the computer and add air integration later.

O.i wrist computer

A good fit for a first computer or for divers who hire regulators. Read cylinder pressure on your existing gauge.

  • Colour dive display, compass and Digital Dive Slate
  • Surface GPS and Oceanic+ dive log
  • Strap, bungee, charger kit and case included
Buy the O.i wrist computer

O.i with wireless air

A good fit if you own a regulator and want to see cylinder pressure beside depth and no-deco time.

  • Add an Oceanic wireless transmitter, sold separately
  • See gas time remaining and review gas use after the dive
  • Pair up to three compatible transmitters
Ask for a transmitter quote

Prefer to talk it through? Call the Ramsgate shop on (02) 9583 9662.

Close view of the O.i on a diver’s wrist while preparing dive equipment

Take the dive briefing with you

Before you get in

Heading to Bare Island with a buddy? Put the landmarks from your briefing and the shots you’d like to take into the Digital Dive Slate. Sync the note before you kit up.

On the reef

Bring up your note with the dial. When you need a heading, the tilt-compensated compass can lock a bearing and show its reciprocal for the return leg.

Back on shore

Open the dive profile in Oceanic+. With a surface GPS fix, your log can mark where you entered and exited the water.

What’s in the box?

Oceanic O.i with its wrist strap, bungee kit, charging accessories and zippered storage case

The wrist computer comes with an adjustable silicone strap, an elastic bungee mount, an induction charger kit and a zippered EVA case. The transmitter is a separate purchase.

Specifications

Display & alerts
2.4 in (6.1 cm) colour TFT, automatic brightness, visual and vibration alerts
Dive modes
Scuba (air or nitrox) and Gauge
Gas settings
Up to three gases. Air, or nitrox from 22% to 100% oxygen
Decompression model
Bühlmann ZHL-16C, three conservatism presets and custom gradient factors for trained users
Wrist unit
85 × 58 × 22 mm, 100 g. Reversible display for either wrist
Depth rating
100 m instrument rating. Plan dives within your training.
Computer part number
04.8951.07
Read the O.i user manual (PDF)

Oceanic O.i questions, answered

What is the Oceanic OI dive computer, and who is it for?

Oceanic calls it the O.i Wrist Dive Computer. It’s a rechargeable scuba computer for air and nitrox, with a 2.4-inch colour display and one dial. It suits a diver choosing a first wrist computer as well as someone who wants to add wireless tank pressure later. The same wrist unit works with or without a transmitter.

How long does the battery last on a dive trip?

Oceanic lists about 6–7 hours at full brightness and 8–10 hours at half brightness. Low backlight can extend this to 22 hours in favourable conditions. At around 20°C, the supplied charger can take the wrist unit from 20% to 80% in about 30 minutes.

Does the Oceanic O.i need a subscription or an iPhone?

No paid subscription is required to dive with the O.i. A free Oceanic+ account handles activation, dive logs, slate notes, settings and firmware. Use the iPhone app, or the Oceanic+ web app in a compatible Bluetooth-enabled browser on Android, Windows or Mac.

Will it work with my existing transmitter?

Oceanic specifies wireless transmitter part 04.8000.02. If you already own one, send us its part number before ordering. Oceanic’s EN 250 certification for the transmitter’s pressure indication covers compressed air only. The nitrox range above describes the computer’s gas settings.

Can I use GPS to find my way underwater?

GPS records surface positions when the unit has a satellite fix. Underwater, use the digital compass for a bearing. The dive log shows the surface fixes. Your compass is the tool for the route you swim between them.

Does it have a freediving mode?

The O.i offers Scuba and Gauge modes. Gauge records depth and time without decompression calculations. If you want dedicated freediving functions as well as scuba, explore our dive computer buying guide.

For the manufacturer’s specifications and setup advice, see Oceanic’s O.i overview and O.i support answers.

Get your Oceanic O.i

Order the wrist computer online from Abyss in Sydney. If you’re unsure whether your transmitter is compatible, ask our Ramsgate dive team.

278 Rocky Point Road, Ramsgate NSW
Top